Real Working Pen With Video And Sound Recording Insert the Micro SD Memory Card
Gently, but firmly, slide the micro SD card into your pen slot (see illustration). You should feel solid resistance when the SD card is fully inserted into the pen. About 1/8" of the SD card will show when it's inserted correctly. You are now ready to use your pen.
Note: The Cam Pen will not work without the micro SD memory card. All recordings/photos are stored on the SD card.
TIPS & TRICKS
Ensure the micro SD card is pushed in completely or it will not collect data from the recording session.
The indicator light will blink red to indicate an SD card error. (This typically means the SD card is inserted improperly.)
Your SD card's memory capacity (2GB - 4GB - 8GB - 16GB) will determine how much data can be recorded while using the pen.
Your pen has a rechargeable lithium battery that can hold about 1.5 hours of recording time for both videos and photos.
STEP 2 - TURN ON THE SPY PEN
Power up your pen by pressing the On/Off Button on the top of the pen (see illustration) for 2-3 seconds. (To power off, press On/Off Button for 6 seconds.)
Check the indicator light to ensure the pen has powered up properly. A SOLID GREEN indicator light will show the pen is on and in READY MODE.
READY MODE means you can start taking videos/photos.
STEP 3 - START RECORDING VIDEO
From READY MODE start recording by pressing the On/Off Button for 2-3 seconds.
Check the indicator light. The light will blink several times to indicate that recording is about to begin.
Once recording begins the indicator light dims to a slow and steady blink. It should not attract attention during a re